|Home||» Products||» Vacuum Pumps||» Liquid Ring Vacuum Pumps|
For managing the applications of water, liquid, gas and air movement in different industries, the liquid ring vacuum pump is manufactured. To ensure high end transfer solutions to industries, we design and manufacture pumps on the basis of highly praised liquid ring technology. These devices are considered to be the best for the handling operations like mineral beneficiation, extracting moisture, vacuum filtration, during the processing of paper water removal from the pump is done through these, mineral ash handling and even more. For the use in oil refineries, sugar mills, distilleries, washeries, coal mines and power plants this is the right product and can also be availed in 5000 m3/hr to 22000 m3 /hr operating capacity. It is known for catering wide range of industries like chemicals, paper, fertilizer, pharmaceuticals, textile and railways.
With the help of our technically qualified experts, company is acknowledged as one of the renowned manufacturers and exporters of Liquid Ring Vacuum Pumps. These pumps are durable and easy to use & maintain because there is only one rotating part. Made up of high grade materials like steel and cast iron, these vacuum pumps are immensely used in petrochemical, solvent, sugar, chemical food processing oil, paper industries & lamination plants. Moreover, clients can get Liquid Ring Vacuum Pumps from us without any delay.
Our liquid ring vacuum pump possesses an impeller with cutting edges connected to an internal center point, situated in the body of cylindrical shape, yet offset against the middle. The impeller lies among the two end plates known as port plates that have formed holes cut in them acknowledged ports. Pump demands a fluid (likewise called the sealant) to make vacuum. Before beginning the pump, it ought to be incompletely loaded with the fluid sealant. The fluid can be water (creating it a water ring pump), solvent or oil, contingent on the usage. When the pump is still, some impeller cutting edges are submerged in the sealant fluid and when it starts, impeller suspends the fluid sealant by outward pressure, to the outer body walls, creating a liquid ring at exterior body walls. Since the impeller is offset against the body, some blades are completely drenched in fluid, and some not. The void space of our liquid ring vacuum pump is devoid of fluid and closed between the impeller blades and sealant, acknowledged as impeller cell. Single impeller cell against the pump highest point, counter-clockwise, the fluid subsides against the center point, working as a fluid piston to make a bigger cell. It is pump suction, drawing in vapors, gases or air via the inlet port at impeller sides. Following impeller cell goes in the channel port as well as toward the release port; the fluid of sealant is constrained back in the impeller center point, making the pressure step. As impeller cell goes in the release port, the pressure is at its most elevated, and the gasses, alongside some fluid sealant are depleted through the release port to climate. Albeit, the fluid sealant is profoundly turbulent that releases along with gases.
PL 904 - Series
Suction Capacity 4500 to 22000M3/Hr
Maximum Vacuum 700mm of Hg (G)
Applications:- Pulp & Paper, Sugar Mill, Power Plant & Process Industries.